View Parts List Watch the Video Find A Local Dealer

9000GN

High-speed, high-volume reloading at its best.

The revolutionary Auto-Dex™ automatically moves the shells through each reloading stage by simply returning the handle to the top of its stroke.
Our factory-set speed provides uniform movement through every reloading stage regardless of operator action.
Multiple operations at six stations produce a finished shell with every stroke of the handle.
The operator simply puts in the wads and shell casings and removes a loaded shell with each pull of the handle.
Finished shells are automatically ejected from the shell carrier after final crimping.
Fully automatic primer feed holds 200 plus primers.
Features auto-cycle charging, and our exclusive three-stage crimp.
Power Ring resizer gives consistent, accurately sized shells for optimum gun performance, without interrupting the reloading sequence.
Load 12 to 16 boxes of shell an hour.
Resizes high and low base shells.
Available in 12, 16, 20, 28 gauge and .410 bore.
Die sets are not available to convert to another gauge.
Optional kits to load 3" shells for 12 and 20 gauge by purchasing:
- 100858212 3" Conversion Kit 12 Gauge
- 100858220 3" Conversion Kit 20 Gauge
Includes 3 bushings and 1 charge bar as follows per gauge selected:
- 12 Gauge: 29, 30, & 32 Bushings and 1-1/8 oz. Charge Bar
- 16 Gauge: 23, 25, & 29 Bushings and 1 oz. Charge Bar
- 20 Gauge: 20, 22, & 24 Bushings and 7/8 oz. Charge Bar
- 28 Gauge: 14, 16, & 21 Bushings and 3/4 oz. Charge Bar
- .410 Bore: 10, 11, & 12 Bushings and 1/2 oz. Charge Bar

NOTE: Due to high demand this shotshell reloader will have a 6 to 8 week processing time.

View 9000 Series Manual

Choose Type

Qty

#1009000GN12

$931.73

Qty

#1009000GN16

$1,012.07

Qty

#1009000GN20

$931.73

Qty

#1009000GN28

$1,012.07

Qty

#1009000GN410

$1,012.07

Existing reviews

9000GN 12ga

I have loaded thousands upon thousands of shells with my 9000s I currently have 3 one for 12, one for 20 and one for 28 gauge. After initial set up they run flawless . The ability to change loads is quick and simple without readjusting the initial set up. A definite two thumbs up. Whether you have reloaded before or not this is the machine to get, that is why I own 3 - simply put it is THE BEST machine on the market and support is second to none with any questions what so ever
(Bret Davies)

From: | Date: 9/4/2025 10:47 AM

Was this review helpful? Yes No (0/0)

9000GN 12ga

Spend time learning how it works, clean it, keep it lubricated and use valid loading data. Each pull of the handle use a cadence and check "primer, wad, shot, shell" -- make sure to keep your powder reservoir +half full, you'll get more accurate results. Did I mention keep it lubricated? Always MEASURE your shot load and powder weight - the chart gets you close… but make sure. I love this thing!
(Robert Houston)

From: | Date: 9/4/2025 11:05 AM

Was this review helpful? Yes No (0/0)

9000GN 20ga

I have shot over 85,000 Skeet targets registered with the NSSA and several thousand more Sporting Clays targets registered with the NSCA. Most of these targets fired upon with reloads made on my MEC 9000GN reloaders. (Some venues and events will not allow reloads to be used.) Not only was I not handicapped by using my loads, but I feel it was an advantage. I used "lesser" reloaders from MEC and other brands and I am certain that there is none that met the same "cost to benefit" ratio the MEC 9000GN's provide. Not only can it save you money and allow more shooting for the same money, it is a relaxing time while you make your on custom loads. Quiet time focused only on the process can allow you to unwind from the rigors of everyday life!
(Steven Haynie)

From: | Date: 9/4/2025 11:06 AM

Was this review helpful? Yes No (0/0)